GOLD'S
     A WAITIN'  
      FER YA!      
GIT OUT THERE
AND GIT IT!!

WufStuff
~0000}}}<>}}}<>}}}<>}}}<>}}}<>}}}<>}}}:o-<
Outpost Aguila

After a couple months at the mine digging for that illusive
 'yellow metal' in the 100+ desert heat...
Clean-up's been done and poke of gold dust's been stashed away...

Tired of losing all that
fine flour gold in the tails
and having to run it again?

Panning & Snuffing for hours
to separate cons?

Wish there was a cheap
easy way to do it?

HERE'S THE ANSWER

AzAirSluice
~0000}}}<>}}}<>}}}<>}}}<>}}}<>}}}<>}}}:o-<

Build It Yourself
For about $50!

Arizona Air Sluice
PLANS

Fine Gold
Air Recovery System
 

    Separate
 heavy fine materials
   
  GOLD 
  SILVER 
   COPPER  
 BLACK SANDS
From your concentrates!

Works equally well with
screened 'pit run', concentrates,
plate ground or ball milled material also

Click Here To See Photos
& Video Of Machine Working

We're not going to spout off percentages of fine gold recovery from this machine but it's way up there. We've had some of the best panners in AZ try to find any gold in the tails and none have yet to recover even a speck after running material thru the AzAirSluice.

We designed and originally built this machine back in 1998 when we discovered a lot of extremely fine gold in a wash here in Southwestern Arizona. We had been conventionally dry-washing it and discovered that most of the fine gold, less than 100 mesh, was being pulled by the larger material into the tails. The fine gold we did get was just being trapped 'accidently' as the Fine Gold just didn't have enough weight to compete with the larger stones for position in the bottom of the riffle bars. 'Pickers' were in traps, but most of the fine gold was going out with the tails. Every time we checked the tails there was that elusive fine powder gold that had been washed from the riffles by the push of the larger material down the sluice.

Classification seemed to be the answer as we had no real values, a picker or two, in the larger material. Gold better than 1/4" and they were easy to spot when screening and picked out without the clutter of fine material covering them up. We eventually set up a plastic chute for the oversized material and put a metal detector over the trough to detect any metals in the tails leaving primary grizzly.
.
In this particular area and the fineness of the material being dug we realized we were loosing was about 20-25% of the fine gold per run! About $150-$200 per ounce that was being lost. I didn't want to spend several hundred or even thousands of dollars on a machine to 'see if it would work' with this material, but just couldn't leave all that fine gold on the ground.

That is when the AzAirSluice was born. I needed a machine that could process the fine sands and separate the fine flour gold from them that a conventional drywasher couldn't catch

New riffle board design allows for 60 SECOND clean up. No Joke. Release the 4 latches, lift out riffle tray, dump it in a bucket, couple taps on screen and back into the machine, snap down latches and continue processing!

The trick of this verses other dry washers is that the action of the riffle tray is in an upward circular motion and not side to side like conventional dry washers. This allows material to 'hover' in the air stream allowing even the smallest heavier particles of 'heavies' to reach the 'safety' of the bottom of the riffle and not being caught in the top flow and washed out.
Static electricity is created in the air flow and on surface of riffle tray grating, charging the lightest ground quartz sand materials allowing them float right off and keeping material in constant 'fluid' motion.

Since the price of gold is up right now more dry washers are worried about loosing the fine gold that adds up in the pocket and would take hours to pan out and snuff up pan by pan. Guys and gals that are using dry washers have been amazed at how much fine gold they are loosing in their tails after running it thru this machine. Now they screen tails coming off the dry washer to 1/8"- 3/16" and running them thru the AzAirSluice capturing the finest 'lost gold' in the cons, and getting it all!

I have been using this machine for past 10 years now and it has gone thru some evolution over this time. I had not thought of offering plans but demand of locals who have seen it work have been driving me crazy to build them one. I just don't have the time to do production of the unit and now spending so much time now running others concentrates I can't get out to the mine as much as I'd like.

This unit can be built from off the shelf items purchased at any Hardware or Home Improvement store for about $50 and a little time. Even less if you're a good scrounger!
.

 

ITEM #:  AzAirSluice Plans

Click To See Photos & Video Of Machine Working:

DESCRIPTION: 
You will receive a 8 page detailed plans set to build this air concentrator in simple easy to understand drawings and text. If you can use a screwdriver and a bottle of glue you can build this unit.

Photo package of construction and completed unit.

Tips and tricks to build the air box and operation.

Email support while building and operating. If you have a question just ask it! Only dumb question is one that wasn't asked.

Updates of design changes from time to time.

Access to AzAirSluice Forum meet with others building and using this unit. Trade tips, tricks, photos for construction, operating, modifications and maybe even maps to 'hot spots' for fine gold!

Parts list offers options for parts.

Can be built for about $50 (or much less if you're a good scrounger) using simple hand tools and "off the shelf" parts available at any hardware store or lumber yard.

400# of CONCENTRATES
or SCREENED PIT RUN
PER HOUR!

400# of 'screened' equals about 1 ton 'pit run' after classifying depending on geology of area. Screened pit material or concentrates from sluice can be put directly in hopper for metered feed rate to riffle tray.

96% OF THE GOLD BEING FOUND TODAY IS LESS THAN 1/4"

Depending on particulate size being run you can run up to 1/4" screened 'pit run'. Run your larger material in regular sluice without all the fines plugging it up. No sense running larger material if there are no values there.

GRAVITY + AIRFLOW + AGITATION = RECOVERY
 

All material is kept in an air flow suspension, agitation is caused by forward and backward motion of the riffle board by the offset fan unit and gravity allows heavier material to settle trapping it against riffle on downward side of tray. Adjust air flow and angle of main frame to desired classification.

60 SECOND CLEAN-UP

New riffle board design allows for 60 SECOND clean up. No Joke.
Release the 4 latches, lift out riffle tray, dump it in a bucket, couple taps on screen and back into the machine, snap down latches and continue!

I have tweeked this unit over the past 10 years to suit material being run. Best size for material for this riffle board is 0-5mm screened. Other riffle board designs are available to suit your needs. I use this here to clean up the concentrates also.

RECOVERS
325 MESH GOLD
ONE PASS!

This is one of the best machines for separating finest of the fine gold from concentrates. Testing has shown that recovery down to 325 mesh gold. I have run cons on a spiral wheel and still got fine gold from this machine out of the tails off the wheel!

GREAT FOR RUNNING
SCREENED SANDS!

 Air fan 'squirrel cage' blower is most expensive part of the unit and can be obtained new or salvaged from most any forced hot air heater. I get mine from a heating contractor that scraps out the old heaters when installing new ones.
Portable with power supply. A small 1K Honda 'lunch box' generator powers this one no problem.

RECOVERS 'LOST GOLD'
FROM YOUR CONCENTRATES

it goes to bottom
of riffle TRAY
AND IT STAYS THERE!

FANTASTIC for that FLAKE GOLD that gets blown out of dry washer or wet sluice

Flat flake gold just 'stands up' looses resistance to air flow and lays back down when pressure from underneath lowers!

SHIPPING: $ FREE!
Detailed plans set will be emailed to you FREE
or in PRINTED FORM for $2.50 via USPS mail.
Drop me an email and we'll talk.

Additional photos available CLICK BELOW:
WufStuff Photo Pages
And always remember at WufStuff
You always get Something Extra!
We're not your typical seller
We mine this material and can afford to be generous.
Well over 4200 happy customers on various
auction/sale sites in the past 6 years.
Buy With Confidence!
Ask past buyers...
They're Calling us 'Lubo Loco'
'The Crazy Wuf'
Out Here in the Desert

If we weren't half crazy we wouldn't be here
But they'd just have to find another place to keep us!

Since you've seen this page come join the gang on the blog site.
Tips, Tricks, Trades and some good ole jabberin'
with other Miners & Rock Heads!
 azairsluice.blogspot.com

Ya'll Welcome!